Publicidad
Idiomas disponibles
Idiomas disponibles
2. Install the battery pack onto the vacuum cleaner.
3. Press the power button to power up the vacuum cleaner.
4. Press the speed adjustment button to select low speed or high speed, and then
press the start/stop button to start the vacuum cleaner. Or, press the TURBO
button to start the vacuum cleaner directly at maximum speed.
NOTE: The speed can also be adjusted during vacuuming. For more information refer to
the chapter "SPEED SELECTION".
To Stop the Vacuum Cleaner
1. Once the vacuuming is completed or when the dust tank is full, press the start/
stop button to stop the vacuum cleaner temporarily.
2. Or press the power button to power down the vacuum cleaner completely.
3. Remove the battery pack.
4. Empty the dust tank into a suitable receptacle or drain.
NOTE:
The vacuum cleaner will resume the previously active speed setting when
restarting.
Power Button Indicator
Power Button
Indicator
Solid green.
Flashing green 6
times, then shuts off.
Flashing green
continuously.
26
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
Meaning
Standby.
The machine runs properly.
Liquid level in the tank
reaches the bottom tip of the
liquid sensors.
Electronics error.
Action
No actions required. The
vacuum cleaner will turn off
automatically after 1 hour of
inactivity.
Normal operation.
Stop the vacuum cleaner,
remove the battery pack, and
then empty the dust tank.
Contact EGO customer
service for help.
Publicidad
