Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL (Fig. 10)
◾
The remote control could be
positioned on the vacuum hose
during vacuuming (Fig. 10a).
◾
When the vacuum cleaner is
powered on, you may start/stop
the vacuum cleaner, or switch the
machine into TURBO mode by using
the remote control.
NOTE: The remote control cannot switch between regular low or high speed.
◾
The remote control can also be used as a flashlight for dark areas, especially
when using the crevice nozzle.
Remote Control Pairing (Fig. 10b)
The remote control was paired with the
vacuum cleaner at the factory. However,
in cases when the remote control is
damaged or lost, follow below steps to
pair your new remote control with the
vacuum cleaner.
1. Install the battery pack onto the
vacuum cleaner.
2. Press the power button to power up the vacuum cleaner.
3. Long-press the start/stop button on the vacuum until the power button indicator
flashes green slowly.
4. Press the TURBO button or the start/stop button on the remote control as soon as
the power button indicator starts flashing green slowing.
5. The power button indicator will flash green fast and then shine solid green to
indicate the pairing was successful.
28
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
10a
10b
2
3
Publicidad
