Storage - Maruyama E30S Manual Del Propietario U Operador

Orilladora de eje recto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Storage

For long term storage of the Edger:
1.
Empty the fuel tank into a suitable fuel storage
container.
2.
Pump the primer bulb on the carburetor until all
fuel is discharged through the clear fuel return
hose.
k
CAUTION
POTENTIAL HAZARD
• Oil may squir t out of the spark plug
opening when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face
away from the spark plug opening.
3.
Run the engine to remove any fuel that may
remain in the carburetor.
4.
Perform all regular maintenance procedures and
any needed repairs.
5.
Remove the spark plug and squirt a very small
amount of oil into the cylinder.
6.
Pull the starter grip once.
7.
Slowly pull the starter grip to bring the piston to
the top of the cylinder (TDC).
8.
Reinstall the spark plug.
9.
Store the Edger in a dry place away from
excessive heat, sparks or open flame.
— US-26 —

Publicidad

Tabla de contenido
loading

Tabla de contenido