Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
POTENTIAL HAZARD
• When engine is running, Attached Tool is
rotating/ moving and other par ts are
moving.
WHAT CAN HAPPEN
• Contact with rotating/moving Tool or
other moving parts could cause serious
personal injur y or death.
HOW TO AVOID THE HAZARD
• Always turn off your Pruner before you
clean or
Good maintenance includes regular checking of all
fasteners for correct tightness and cleaning the entire
machine.

Storage

For long term storage of the Pruner:
1. Empty the fuel tank into a suitable fuel storage
container.
2. Pump the primer bulb on the carburetor until all fuel
is discharged through the clear fuel return hose.
3. Run the engine to remove any fuel that may remain
in the carburetor.
4. Perform all regular maintenance procedures and any
needed repairs.
5. Remove the spark plug and squirt a very small
amount of oil into the cylinder.
POTENTIAL HAZARD
• Oil may squir t out of the spark plug
opening when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face
away from the spark plug opening.
6. Pull the starter grip once.
7. Slowly pull the starter grip to bring the piston to the
top of the cylinder (TDC).
8. Reinstall the spark plug.
9. Store the Pruner in a dry place away from excessive
heat, sparks or open flame.
− US-26 −
CAUTION

Publicidad

Tabla de contenido
loading

Tabla de contenido