Gearcase Maintenance; General Cleaning And Tightening - Maruyama E30S Manual Del Propietario U Operador

Gearcase Maintenance

Maintenance Interval
The gearcase should be inspect after each 30 hours of
use.
Gearcase Lubrication
The gearcase should be checked for lubrication after
each 30 hours of use. Grease fittings are installed. Use
#2 lithiumbase bearing lubricant.
Attaching Shaft
Boss Adapter
Grease Fitling
Gearcase
Collar
— US-25 —

General Cleaning and Tightening

k
WARNING
POTENTIAL HAZARD
• When engine is running, cutting blade
is rotating and other parts are moving.
WHAT CAN HAPPEN
• Contact with rotating cutting blade or
other moving parts could cause serious
personal injur y or death.
HOW TO AVOID THE HAZARD
• Always turn off your Edger before you
clean or perform any maintenance on it.
The Maruyama Edger will provide maximum
performance for many, many hours if it is maintained
properly. Good maintenance includes regular checking
of all fasteners for correct tightness, and cleaning the
entire machine.