Publicidad
Idiomas disponibles
Idiomas disponibles
12
English
Notification symbol
shaving heads. The shaver beeps, the
replacement reminder lights up and the arrows
flash to indicate that you have to replace the
shaving heads.
Note: After replacing the shaving heads, you can
reset the replacement reminder by pressing the
on/off button for 7 seconds. If you do not reset
the replacement reminder, the shaver resets
automatically after 9 shaves.
Overheating
If the shaver overheats during charging, the
notification symbol flashes. When this happens,
the shaver stops charging automatically.
Charging continues once the temperature of the
shaver has decreased to the normal level after
approx. 10 minutes.
Blocked shaving heads
If the shaving heads are blocked, the notification
symbol continuously lights up red. The
replacement reminder and the cleaning reminder
alternately flash white and the shaver beeps. In
this case, the motor cannot run because the
shaving heads are dirty or damaged. If the
shaving heads are dirty, you have to clean them.
If the shaving heads are damaged, you have to
replace them.
Publicidad
