Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the trimmer attachment
sets. If you accidentally put a cutter in the
wrong shaving guard, it may take several
weeks before optimal shaving performance is
restored.
6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head
holder.
10 Place the retaining ring on the shaving head.
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn
the ring clockwise until it clicks to indicate that
the ring is fixed.
12 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
Never dry the trimmer with a towel or tissue,
as this may damage the trimming teeth.
Clean the trimmer attachment after each use.
23
English
Publicidad
