Hach 8398 Serie Manual Del Usuario página 6

2.2 Icons used in illustrations
Manufacturer
supplied parts
2.3 Product overview
The ultrapure conductivity module lets a digital SC Controller connect to an analog sensor. The
module connects to one of the analog module slots (3 or 4) in the controller.
For calibration and operation of the sensor, refer to the sensor user manual and the SC Controller
documentation.
2.4 Product components
Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 1 Product components
1 Module connector
2 Ultrapure conductivity module
Section 3 Modbus registers
A list of Modbus registers is available for network communication. Refer to the manufacturer's
website for more information.
Section 4 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Electrocution hazard. Remove power from the instrument before this procedure is started.
6 English
User supplied parts Look
Figure
3 Label with wiring information
4 Cable gland
D A N G E R
D A N G E R
Do one of these
Listen
options
1. If any items are missing or