Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3 - Connect the blue wire of the safety device (which comes from the operating handlebars) to the engine and connect the terminal of the brown wire
to the screw (A), as shown in the images below.
STEP 4 - Make sure the operating handlebar throttle lever moves forward when it is operated. Remove the engine breather cap. Loosen the cable adjustment
lock (A). Then make sure that the engine throttle lever (B) moves forward when operated. Insert the cable into the hole outlet (C). With the parts in place,
put the cable exit clasp (A) and tighten the screw.
A
A
11
Publicidad
