Publicidad
Idiomas disponibles
Idiomas disponibles
6. Pull the starter rod/knob continuously, quickly and firmly to start the engine;
ATTENTION: Both the pulling and returning movement of the retractable starter rod/handle must be firm and continuous, in order to avoid breakage
of internal components. To perform the correct movement, just pull the rod to the position that offers a little resistance, which indicates the ideal fit
of the internal components, and from this point on, continue the movement in a continuous, fast and firm way, without sudden movements, the same
is valid for returning the rod to the initial position, that is, do not release the rod/handle while the rope is stretched out of the housing.
7. When the engine starts, return the choke rod to the "Closed" position, and move the throttle rod to a position of 50 to 75% of the throttle so that
it is continuous;
8. If the engine does not start after 3 attempts, open the choke slightly to prevent drowning and repeat the entire engine starting process;
9. Let the engine warm up for 3 to 5 minutes before using it under load, that is, in full operation;
10. Always operate the engine with the throttle rod fully open (100%) when the machine/equipment is in operation.
Turning off the Engine
1. Turn off the throttle to the idle position;
15
Publicidad
