BM 2610011761 10-10:BM 2610011761 07-10.qxp 10/5/10 9:24 AM Page 21
Read instruction manual first! Remove battery pack from the tool before making
W RNING
adjustments or assembling accessories.
TROUBLE: jAMMED FASTENER
PROBLEM
1. Wrong size or angle fasteners
2. Damaged or worn driver blade
3. Material and fastener length too rigorous an application
4. Low battery charge or damaged battery
5. Debris in nosepiece
6. Debris in magazine
7. Worn magazine
8. Worn or damaged follower spring
REMEDy
1. Use only recommended fasteners
2. Replace driver/return assembly; see authorized service center
3. Material or fastener length inappropriate
4. Charge or replace battery
5. Clean nosepiece
6. Clean magazine
7. Replace magazine; see authorized service center
8. Replace spring; see authorized service center
Trouble Shooting Guide (continued)
-21-