Publicidad
Idiomas disponibles
Idiomas disponibles
page 15 for installation instructions (Fig. 11 & 12).
9. Place the powerhead back on the collection tank and secure into place using the latches
(Fig. 14 & 15).
10.Insert the locking end of the hose into the vacuum port on the collection tank and turn clockwise
to lock into place (Fig. 16).
11.The included attachments lock together to prevent them from detaching during use. Connect
the desired attachment onto the end of the hose or extension wand by aligning the tabs and
push together until they lock into place (Fig. 17). To remove the attachment, press down on the
locking tab and slide it off (Fig. 18).
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the
not change the plug in any way. Double insulation
grounded power cord and grounded power supply system.
DRY VACUUM OPERATION
1
6
DRY VACUUMING
WARNING:
ENTITLED "IMPORTANT SAFETY INSTRUCTIONS". DO NOT VACUUM IN AREAS
WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUST IN THE AIR.
FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER
FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL,
OR AEROSOL SPRAYS. EXPLOSIVE DUST INCLUDE BUT ARE NOT LIMITED TO:
COAL, MAGNESIUM, GRAIN, OR GUN POWDER. TO REDUCE THE RISK OF HEALTH
HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.
3
2
8
7
BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION
eliminates the need for the three-wire
4
9
10
5
Publicidad
