Unpacking The Device; Disposal Of Packaging; Installation & Assembly; General Safety Information - Rohde PW 600 Instrucciones De Uso

4.2.

Unpacking the device

⇒ The slab roller is heavy, so unpack the slab roller with two, or better yet, four people.
⇒ Carefully unpack the device and its individual parts.
⇒ Set aside the large wheel handle and the small parts (2 Allen keys 6 & 8 mm, 2 cranks, 1 black blind plug).
⇒ Unpack the table legs, the large wheel handle and other individual parts.
⇒ Loosen the screws securing the linen cloth to the retaining bar at the front of the work surface and remove
the protective sheet from the work surface. Slightly re-tighten the screws to secure the linen cloth to the
retaining bar.
⇒ Ensure all packaging materials are removed from the device and the individual parts.
4.3.

Disposal of packaging

Take the packaging materials to an appropriate disposal point and help to promote environmental protection. For
further information concerning the disposal of packaging material, please contact your local specialist, local authority
or municipal administration.
5. Installation & Assembly
5.1.

General safety information

WARNING
Risk of personal injury and property damage!
The slab roller is heavy, so transport and assemble it with two, or better yet, four people.
5.2.

Note on the operating location

The device must be placed level on a level surface. If the device is tilted or wobbles, the output will be badly
affected, or the device will be damaged (storage) and may fall over.
5.3.

Transport/Delivery

5.3.1.

Transport

Transport the slab roller on the original pallet using a lift truck.
5.3.2.

Delivery

The slab roller is heavy, so move the device without a pallet with two, or better yet, four people.
23 / 118 - EN -