Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY CHARGED CONDITION
INDICATOR
The battery
is equipped
with a charged
condition indicator.
GREEN
INDICATOR LIGHTS
BUTTON
RED
INDICATOR LIGHT
By pressing
the button
ON, the charged
condition
can be checked
when the battery is
removed
or when the machine
is not in use.
After approx. 5 seconds,
the charged
indicator
switches off automatically.
• • • When all three lights are illuminated,
this
indicates the battery pack is between
67% and
100% charged.
• •
When
only
two lights
illuminate,
this
indicates the battery pack is between
33% and
66% charged.
•
When
only
one light
illuminates,
this
indicates
the battery
pack is less than 33%
charged.
When
one light blinks
the battery
pack
is
almost fully discharged.
TEMPERATURE
INDICATOR
LIGHT
The red indicator
light signals
whether
the
battery
or tool (with battery
inserted)
is in the
optimum
temperature
range.
When
the
temperature
is too high,
the tool
will not
operate at full capacity.
If
the
red
indicator
light
illuminates
continuously
when the battery
is inserted into
the charger.
The
battery
is outside
the
charging
temperature
range
and cannot
be
charged.
If the red indicator
light
blinks
when
the
button or on/off switch
(with battery
inserted)
is pressed,
the
battery
is outside
the
operating
range of-10
°C to +60 °C.
When
the temperature
is above
70 °C the
battery
turns
off until
it's in the optimum
temperature
range.
INSERTING AND RELEASING BATTERY PACK
Slide charged
battery
pack into the housing
until the battery
pack locks into position
and
the red warning label is no longer visible (Fig. 1).
Your
battery
pack
is
equipped
with
a
secondary
locking latch to prevent
the battery
pack from completely
falling out of the handle,
should it become loose due to vibration.
To remove the battery pack, press the battery
pack release button and slide the battery pack
away from housing.
The red warning
label will
become
partially
visible.
Press the battery
pack release button again and slide the battery
pack completely
out of tool housing.
CHARGER INDICATORS, SYMBOLS AND MEANING
If the indicator
lights are "OFF",
the charger
is not receiving
power
from
power
supply
outlet.
} If the green
indicator
light
is
I
"ON", the charger
is plugged
in
but
the
battery
pack
is not
inserted,
or the battery pack is fully charged.
[
_1
If the green
indicat°r
light
is
..................... BLINKING",
the battery
pack is
being
fast-charged.
Fast-
charging
will automatically
stop
when
the
battery pack is fully charged.
[_1-
] If the red indicator
light is "ON',
the battery
pack is too hot or
cold
for
fast-charging.
The
charger
will automatically
switch
to fast-
charging
once
a suitable
temperature
is
reached.
I_
] If the
red
indicator
light
is
......
BLINKING",
the battery
pack
cannot
accept
a charge
or the
contacts
of the charger
or battery
pack are
contaminated.
Clean
the contacts
of the
charger
or battery
pack only as directed
in
these operating
instructions
or those supplied
with your tool or battery
pack.
-14-
Publicidad
