Publicidad
Attaching the monitor securing bolts to the plasma display
1.
Attach the monitor securing bolts at the 4 locations on the rear of the plasma display.
104
2.
Attaching the assembled metal bracket to the wall
1. Place against the wall and attach securely with screws or bolts in at least 4 places (b). The type of screws or bolts used
at this time will vary depending on the strength and material of the wall and need to be prepared separately by the
installer.
Caution
Please first check the wall strength before attaching.
1162
590
104
590
20-M8 (With a φ 16 hole rivet)
b
b
b
Monitor-
fastening bolt
Monitor-
fastening bolt
The nuts of the monitor-
fastening bolts should be
tightened so that their surface
is level with the screw.
b
Monitor-
fastening bolt
Monitor-
fastening bolt
9
<AZR1041>
En
Publicidad
