Publicidad
Idiomas disponibles
Idiomas disponibles
HELPFUL INFORMATION
•
Auto Operation Button
• Raise the front panel and press.
•
Automatic Operation
• If the remote control fails to function or has been
misplaced, press the Auto Operation button to start
the Automatic operation.
• The Automatic operation will be activated
immediately once the Auto operation
button is
pressed. However, temperature
cannot be adjusted
when in this mode.
• The power indicator on the indoor unit will blink until
the operation mode is selected automatically.
• To cancel this operation,
press once more.
•
Remote Control
Signal Receiving
Sound
• To switch off the beep (Signal Receiving Sound),
press the Auto Operation button for 10 seconds
continuously
or longer.
A "beep", "beep" sound will be heard at the
tenth seconds.
Note : A "beep" sound will be heard at the fifth
seconds;
However please press continuously
until you
heard "beep", "beep" sound.
• Repeat the above steps if you want to switch on the
Signal Receiving Sound.
•
(This is for Servicing purposes only.)
Note: If you press this button continuously
for 5 to 10
seconds, Test Run operation will be performed. A
"beep" sound will be heard after five seconds
indicating the Test Run starts to operate.
_ter
a power failure, the
•
Setting the Temperature
operation will restart automatically
after 3- 4
_tr,(_
can be saved.
minutes.
_e
tgher or lower than the
_tornatically
under the
desired temperature.
prewous opera_rflow
direction when
r
_
_
]
power is resumed as the operation is not stopped
_
Cooling Model
by the remote control
I
I
COOling Operati°n
: 2°F higher
I
•
.... .,oo..,,ho
'
_imer
setting will be
_
14r=_r P t=mn
Y,',r_l
1_
cance,led_e
us me ,d reset the t_rner.
I
I
C_er
I
•
_th_
h,,at__ .......
I
Heating Operation : _
Lower
I
with a built-in surge
pro_er,
in order to further
protect your air conditioner
from being damaged by
•
Air Filters
abnormally strong lightning actMty, you may switch
_r
filters every 2 weeks.
Publicidad
