Descargar Imprimir esta página

HTM HTW-V5WD2N8 Manual De Usuario E Instalacion página 108

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

7.3 Drain hole position
Drain hole
This drain hole is covered by rubber
plug. If the small drain hole can not
meet the drainage requirements, the
big drain hole can be used at the same
time.
5/7/9 kW
It's necessary to install an electrical heating belt if water can't drain out in cold weather even the big drain hole has
opened.
7.4 Servicing space requirements
7.4.1 In case of stacked installation
1) In case obstacles exist in front of the outlet side.
≥500mm
A
Unit
5~9kW
12~16kW
7.4.2 In case of multiple-row installation (for roof top use, etc.)
1) In case of installing one unit per row.
NOTE
2) In case obstacles exist in front of the air inlet.
≥200mm
A(mm)
≥1000
≥1500
103
Drain hole
This drain hole is
covered by rubber
plug. If the small
drain hole can not
meet the drainage
requirements, the big
drain hole can be
used at the same
time.
12/14/16 kW
≥500mm
≥20mm
≥300mm

Publicidad

loading

Este manual también es adecuado para:

Htw-v7wd2n8Htw-v12wd2n8Htw-v16wd2n8Htw-v16wd2rn8