Descargar Imprimir esta página

Imetec BELLISSIMA S2401 Instrucciones De Uso página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
EN
Clean the surface of the heating plates (1/2) and the handle with
a soft, damp cloth. The cloth found inside the pack can be used
to clean the plates once they are cold.
Problem
The plate doesn't
warm up
If you do not use the appliance for a long time:
Clean the appliance as described in the "Cleaning" chapter.
Store the appliance in a dry and clean place.
The appliance can be hung up using the hanger loop (5).
The packaging of the appliance is made of recyclable materials.
Dispose of it in accordance with the environmental protection
regulations.
Pursuant to Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), the crossed bin symbol on the
appliance or its packaging indicates that the appliance must
be disposed of separately from other waste at the end of its
useful life.
The user must therefore take the appliance to an appropriate
recycling centre for electrical and electronic equipment. Alternatively,
instead of handling the disposal, the user can hand over the appliance
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
TROUBLESHOOTING
The supply cable is
not connected to the
mains.
The on/off button
was not switched on
correctly.
STORAGE
WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
WARNING! DO NOT wrap the supply
cord around the appliance.
DISPOSAL
Cause
16
Solution
Connect the cable to the
power supply.
Press the on/off button.
If the problem persists,
contact an authorised
service centre.

Publicidad

loading