Tripp-Lite SmartOnline SUINT1500LCD1U Manual Del Propietário página 13

2 Introduction
2.5.4 7-Segment Display
Note: Read the word shown in Column A together with that in Column B to interpret the display meaning.
Icon Description
1. IN & V: When the above two words illuminate together, input voltage is indicated.
IN
2. IN & Hz: When the above two words illuminate together, input frequency is indicated.
1. OUT & V: When the above two words illuminate together, output voltage is indicated.
OUT
2. OUT & Hz: When the above two words illuminate together, output frequency is indicated.
When the word 'SET' illuminates, it indicates the UPS is in the Setup Mode.
You can set up the following items via the LCD. For how to set up, refer to section 5.7 Setup Mode.
1. Alarm Mute (On: Mute)
SET
2. Power Strategy
3. Inverter Voltage
4. Bypass Range
5. Off Mode Setting (Off: Standby; On: Bypass)
TEST When the word 'TEST' flashes, it indicates the UPS is under battery test.
1. BATT & %: When the above two words illuminate together, remaining battery capacity is indicated.
BATT
2. BATT & V: When the above two words illuminate together, battery voltage is indicated.
1. LOAD & %: When the above two words illuminate together, it indicates how much of the UPS system's total
capacity is in use.
LOAD
2. LOAD & KVA: When the above two words illuminate together, the total load in kVA is indicated.
3. LOAD & KW: When the above two words illuminate together, the total load in kW is indicated.
V Indicates 'voltage'.
%
Indicates 'percentage'.
Hz Indicates 'frequency'.
kVA Indicates 'kVA' (kilovolt-amperes).
kW
Indicates 'kW' (kilowatts).
7-Segment Display
13
Column A
Column B