Hitachi KPI Serie Manual De Instalación Y Funcionamiento página 27

INSTALLATION
13.7.1 ELECTRICAL WIRING DIAGRAMS
The electrical wiring connection for the KPI unit is shown in the following figures.
Through the wiring connection hole in the cabinet, connect the cable of the remote control switch or an optional extension cable to the connectors
−
on the printed circuit board inside the electrical box.
Connect the power supply wires and the ground wire to the terminals in the electrical box.
−
Connect the wires between the KPI unit and the indoor unit to the terminals in the electrical box.
−
Controlled network system (CSNET WEB)
¡
Indoor unit
RSW1
Indoor unit
RSW1
KPI + PC-ART
¡
RSW1 DSW6
DSW6
PC-ART
DSW6
PC-ART
RSW1
PC-ART
Indoor unit
RSW1 DSW6
Indoor unit
RSW1 DSW6
DSW6
KPI
RSW1 DSW6
KPI
RSW1 DSW6
PC-ART
27
PMML0185 rev.1 - 03/2010