Teac MC-DX22i Manual Del Usuario página 14

Insert the iPod into the Dock of the MC-DX22i.
Then press the Play/Pause button (y/J) on the iPod. The
MC-DX22i will automatically turn on and start playback
from the iPod's music list.
< If the iPod that is in playback mode is inserted into the Dock,
the MC-DX22i will automatically turn on and start playback of
the iPod.
< Make sure to use an appropriate Dock adapter (see "Getting
started" on page 9).
< The battery of the iPod is recharged to the full whenever the
iPod is docked and the MC-DX22i is connected to the AC
power supply.
< When headphones are plugged into the iPod, sound comes
from both the speakers of the MC-DX22i and the
headphones.
< The Stop button (H) doesn't work in iPod mode.
To select iPod mode
Select "iPod" using the FUNCTION button. If an iPod is
already docked, playback will start.
When no iPod is docked, the iPod indicator on the display
blinks.
In iPod mode, press the Play/Pause button (G/J) to start or
pause playback.
14
Listening to iPod
To suspend playback temporarily
(pause mode)
Press the Play/Pause button (G/J) during playback. Playback
stops at the current position. To resume playback, press the
Play/Pause button (G/J) again.
To skip to the next or a previous track
During playback, press the skip button (. or/ )
repeatedly until the desired track is found. The selected track
will be played from the beginning.
< When the . button is pressed during playback, the track
being played will be played from the beginning. To return to
the beginning of the previous track, press the . button
twice.
Search for a part of a track
During playback, hold down the skip button (.or/) for
more than 2 seconds and release it when the part you want
to listen to is found.