Emmaljunga Sento MAX Manual De Instrucciones página 37

"click".
WARNING
Ensure that children are kept away from
all moving parts of the pram to avoid risk
of injury.
7) Adjustable suspension*
Adjust the suspension by turning the
Suspension adjustment knob to the
desired position.
Soft - A softer suspension
Hard - A harder suspension
Make sure the suspension are in the same
position on both sides.
WARNING
• Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
• The suspension must be in the same
position on both sides of the chassis
to avoid the risk of damaging the
stroller.
8) Assembly of the basket
Assemble the basket according to the
pictures.
Carrycot
1) Assembly of the carrycot
1. To erect the carrycot pull the bar using
the easy pull handle along the bottom
of the carrycot towards the plastic
stops. Repeat both in the foot end and
the head end. *Assemble the inner
fabric with the zipper
WARNING
Make sure the metal bars are firmly
attached to the carrycot frame before the
carrycot is erected. If the metal bars are
not in place, the fabric may be damaged.
2. Remove the mattress from the plastic
bag (discard safely). Place the mattress.
Sento MAX, Sento LUX V 1.1
WARNING
• Do not use a additional mattresses
in the carrycot. Only use the
Emmaljunga original mattress that
comes with the pram.
• Risk of suffocation. Do not let children
play with plastic bags.
3. Press both buttons on the inside of the
hood and pull it up. Attach the apron
using the velcro straps on each side of
the carrycot. The hood can be folded
up and down in the desired position by
pressing both buttons on the inside of
the hood.
4. The hood is attached to the carrycot
with velcro strips.
5. To ad ventilation open the zipper and
roll the fabric upwards.
2) Attach/remove the carrycot
1. Engage the brake. Lift the carrycot
with the handle and place it onto the
chassis. Press the carrycot downwards
until it locks into place, you will hear a
"click" on both sides.
WARNING
• Always check that the carrycot is
properly attached in the locked
position on both sides.
2. Engage the brake. Under the carrycot
base, push the button and pull the
handle towards you. Lift the carrycot
upwards.
WARNING
• 3. Never use the carrycot in the
position with the hood placed towards
the handlebar.
• The hood on the carrycot should
always be placed away from the
handlebar
SE
SE
2-5
11-28
EN
2-5
29-46
DE
2-5
47-66
DK
2-5
67-84
FI
2-5
85-102
NO
2-5
103-120
CZ
SE SE
2-5
121-137
CZ
EE
2-5
18-19
2-5
138-155
EE
ES
2-5
2-5
20-21
156-174
ES
LT
2-5
2-5
22-23
175-192
LT
LV
2-5
2-5
24-25
193-210
LV
PL
2-5
2-5
26-27
211-229
PL
2-5
28-29
37