Emmaljunga Sento MAX Manual De Instrucciones página 40

back until it locks into place.
• Never let the child/children stand on
the footrest.
6) Removal of the seat unit fabric
ERGO
1. Open the press studs on the hood,
remove the hood from the seat frame.
2. Open the press studs and buckles on
each side.
3. Open the fabric under the seat, remove
the fabric from the seat plate.
4. Thread all seat belts through the holes.
5. Remove the push button around the
folding handle and remove the fabric
from the seat frame.
FLAT
1. Press the buttons on both sides of the
hood and remove the hood from the
seat unit.
2. Open the press studs on the seat unit
and on the footrest.
3 Thread the harness straps through the
holes in the fabric.
4 Thread the crotch strap from the fabric
and remove the fabric from the seat
unit.
7) Assembly of the seat unit fabric
ERGO
See point 1) Montera Seat unit Assembly of the
seat unit
FLAT
1. Place the seat unit fabric in the seat
unit. Thread the shoulder straps
through the fabric.
2. Thread the crotch strap through the
seat fabric.
3. Thread the waist straps through the
seat unit fabric.
4. Fasten all of the press studs on the seat
unit.
5. There are a total of 13 press studs. 5
press studs on each side and 3 on the
back.
6. Attach the crotch strap by positioning
40
it around the bumper bar and secure it
by fastening the press stud.
7 Attach the hood into the frame
8 Attach the hood in place using the
velcro strips attached to the seat unit
fabric.
WARNING
• Never use the pram without making
sure the seat unit fabric is correctly
assembled on the frame first.
• The hood should always be
assembled when the stroller is in use.
8) Insect Net (delivery with chassis)
ERGO & FLAT
1.Attach the Insect net using the zipper
on the hood. Pull the elasticated band
of the insect net completely over the
footrest.
2. Use the press stud to secure the
elasticated band of the insect net onto
the seat unit. Repeat on the other side.
FLAT
3. Storage pocket for the Insect Net.
9) Assembly of the apron (accessories)
1. Pull the apron over the footrest.
2. Fasten the apron with the press studs
on the inside of the hood and on the
seat frame.
3. Open the zip in the middle of the
apron when taking your child in or out
of the pram.
IMPORTANT! The hood cannot be
folded down when the apron is attached
to the hood.
10) Raincover (accessories)
1. Assemble the rain cover by placing it
over the hood and the carrycot or the
seat unit.
2. The rain cover has a large window at
the top opening that you can open and
Sento MAX, Sento LUX V 1.1