Descargar Imprimir esta página

Emmaljunga Sento MAX Manual De Instrucciones página 43

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 156
Also lubricate the release mechanism
on the wheels on a similarly regular
basis.
If you use your Emmaljunga pram/
stroller eg. on sandy beaches or under
other dirty and wet conditions make
sure to take extra care of the parking
brake and maintain the braking
system and wheels as detailed above
whenever needed.
3) Washing instructions
Hood:
Take off and extend the hood. Shower the
hood from the inside (interior fabric) with
lukewarm water.Use mild liquid soap as
detergent. Cleanse it thoroughly. Drip dry
the fully extended hood.
Seat fabric and 5-point harness:
Remove the seat fabric from the chassis
and remove the seat board from the seat
unit fabrics. Hand wash seat fabrics in
lukewarm water. Use mild liquid soap as
detergent. Cleanse thoroughly. Drip dry
the seat fabric. Only wipe the nylon straps
and plastic parts clean with a damp cloth.
Do not hand wash. Make sure the harness
is dry before reassembly.
Mattress:
We recommend hand washing, drip dry.
Carrycot:
Remove hood and mattress. Wipe the
exterior fabric and the interior nonwoven
material, clean with a damp cloth. Do not
hand wash. Dry the pram body in its fully
extended position.
General Information
Ironing: If any fabric part needs to be
ironed, always use a 100 % cotton cloth
in-between the iron and the fabric
to protect the fabric surface. Iron the
Sento MAX, Sento LUX V 1.1
exterior fabrics (100 %) polyester and
the interior fabrics on gentle heat (110°C
on the iron). Make sure all parts are
completely dry before reassembly. Check
all seams, edges and zips. You may apply
a material protector on the exterior
fabric after washing. Always apply before
reassembly.
VARNING
Do not place the child/children
in the stroller for at least 24 hours
after applying a material protector.
Reassemble after washing.
Make sure all parts are assembled
correctly according to the instructions
in this manual.
If the wheels have been stored in a
warm environment (for example a
car). Let the wheels cool down a bit
before use, to prevent the wheels
from deforming and cause a greater
wear and tear than normal.
SE
SE
2-5
11-28
EN
2-5
29-46
DE
2-5
47-66
DK
2-5
67-84
FI
2-5
85-102
NO
2-5
103-120
CZ
SE
SE
2-5
121-137
CZ
EE
2-5
18-19
2-5
138-155
EE
ES
2-5
2-5
20-21
156-174
ES
LT
5
2-5
2-5
22-23
min
175-192
LT
LV
2-5
2-5
24-25
193-210
LV
PL
2-5
2-5
26-27
211-229
PL
2-5
28-29
43

Publicidad

loading