WAGNER FINECOAT 9900 PLUS Instrucciones De Uso página 9

FC9900 Plus
5
SPRAYING TECHNIQUE
Hold the paint spray gun upright and maintain a constant
distance of about 3 - 20 cm to the object being sprayed.
Move the paint spray gun evenly either from side to side or up
and down. If the gun is moved evenly, it will produce an even
surface finish. No runs will occur if the speed is correct.
Always start spraying away from the object and avoid stopping
spraying whilst still on the object.
If the round jet setting is used, the distance may
i
be increased according to the size of the object
being sprayed.
•
In case of excessive paint mist formation, adjust the air and
material flow respectively and alter the distance from the
object.
RIGHT
3 - 20 cm
WRONG
Excessive paint mist formation, uneven surface finish.
5.1
BREAKS IN WORK
1. Turn the material regulating knob to the right as far as it
will go (fig. 13).
This will secure the paint spray gun against unintentional
operation.
2. Switch the unit off.
SPRAYING TECHNIQUE
9