Canyon Jondy CNE-KW44 Serie Guia De Inicio Rapido página 6

ENG
GENERAL INFO
The device Canyon Jondy CNE-KW44 – children's smartwatch, with SIM-
card support and wireless connection to a smartphone via a branded app
Canyon Life.
Models: CNE-KW44PP (pink), CNE-KW44BL (blue); CNE-KW44GB
(green).
DEVICE DESCRIPTION
WARNING! The device is not intended for children under 4 years old.
Functions: two-way audio calls; voice chat; emergency call. Remote
monitoring: control of a safe geo-fence; movement history. Music player;
USB mode to transfer files from/to PC; camera; photo album; calculator;
pedometer; stopwatch; alarm clock; games.
Specifications: DC 5.0 V / 1.0 A; 128 MB (RAM), 192 MB (ROM).
Processor: ASR3603S, 832 MHz, single-core ARM; Cortex-R5. Screen:
1.4 inches, 240×240 pixels, IPS, touch screen. Network: 2G, GSM
850/900/1800/1900 mA∙h; GSM 900: 33 dBm, GSM 1800: 30 dBm;
3G/WCDMA B1/2/5/8; 4G/LTE B1/2/3/5/7/8/20; 23 dBm. GPS: L1, 1575;
42 MHz (C/A-code); TD1030 (GPS + GLONASS). Sensitivity of GPS-chip
reception: trace −165 dBm, capture −148 dBm. Camera: 0.3 MP. Built-in
TF card: 512 MB, non-removable. Compatibility: Android 5.1 and newer,
iOS 12.0 and newer. Body: plastic, 43.5×16×23.5 mm, IP67. Strap:
silicone, 20×230 mm. Weight: 48 g. Battery: lithium polymer, 3.7 V,
700 mAh, non-removable. Full charge time: 3.5 h. Operation time: in active
mode up to 2 days; in standby mode up to 5 days. Operating conditions:
temperature 0...+40 °C, humidity 0–80 %. Storage conditions: temperature
0...+40 °C, humidity 0–80 %.
Accessories: Smartwatch Jondy CNE-KW44, magnetic charging cable
Pogo pin (4 pin) with USB Type-A (length 60 cm), a set of tools to install the
card nano-SIM (tweezers, screwdriver); quick start guide.
APPEARANCE (fig. A, B, C). 1. Button 1. 2. Button 2. 3. Speaker.
4. Camera. 5. Screen. 6. Microphone. 7. SIM card slot. 8. Electrical
contacts for charging and data transfer. 9. Charging cable.
If you have any questions before returning your device to the
store, please email us at
with us at the website canyon.eu/user-help-desk.
PREPARATION FOR OPERATION
Charging. Charge the device before using it for the first time. To do this,
connect the charging cable (9) to the electrical contacts (8) as shown in
figure B and connect it to the power supply.
WARNING! The power supply output should not exceed 5.0 V 1.0 A (power
adapter not included).
6
support@canyon.eu or you can chat