SKF TKBA 21 Instrucciones De Uso página 19

Operating Requirements
Operating temperature
Storage temperature
Relative Humidity
IP rating for indication
Dimensions
Transmitter unit
Receiver unit
Carrying case size B
Weight
Transmitter unit
Receiver unit
Total weight (incl. case)
Case contents
10. Spare parts
Designation
TKBA TARGETS
PHP PT/C1 006
PHG PT/C1 008
PHG PT/C1 009
PHG PT/C1 010
TKBA 31-CB
0 to 40 °C (32 to 104 °F)
–20 to +60 °C (–4 to +140 °F)
10 to 90% RH non-condensing
IP 40
98 × 97 × 52 mm (3.9 × 3.8 × 2 in)
N/A
360 × 110 × 260 mm
(14.2 × 4.3 × 10.2 in)
250 g (0.55 lb) with batteries
250 g (0.55 lb) with batteries
1.62 kg (3.57 lb)
TKBA 21
2 × TKBA 21 transmitter unit
6 × AAA batteries
1 × Printed instructions for use
TKBA 21 & 31
3 × passive targets
Groove profile check
Tension tester I 15 kg – 70 kg (30 lb – 150 lb)
Tension tester II 50 kg – 150 kgn (100 lb – 300 lb)
Tension tester III 150 kg – 300 kg (300 lb – 700 lb)
Toolcase with inlay for TKBA 21 & 31
0 to 40 °C (32 to 104 °F)
–20 to +60 °C (–4 to +140 °F)
10 to 90% RH non-condensing
IP 40
98 × 97 × 52 mm (3.9 × 3.8 × 2 in)
Passive targets:
40 × 25 mm (1.6 × 0.99 in)
360 × 110 × 260 mm
(14.2 × 4.3 × 10.2 in)
250 g (0.55 lb) with batteries
250 g (0.55 lb) with batteries
1.88 kg (4.14 lb)
TKBA 31
2 × TKBA 31 transmitter unit
6 × AAA batteries
1 × Printed instructions for use
3 × TKBA passive targets
3 × Belt tension checkers of
different loads
1 × Pulley groove gauges
17
EN