Publicidad
Idiomas disponibles
Idiomas disponibles
ManUally ConfIGURInG neTWoRK seTTInGs
sections
seções
Índice
table of contents
In order for your computer to properly communicate with your Router, you will need to change your PC's TCP/IP settings to DHCP�
Manually Configuring network adapters in Windows 2000, nT, XP, or Vista
1�
Click "Start", "Settings", then "Control Panel"�
2�
Double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP or Vista)�
3�
Right-click on the "Local Area Connection" associated
with your network adapter and select "Properties" from the
drop-down menu�
4�
In the "Local Area Connection Properties" window, click "Internet
Protocol (TCP/IP)" and click the "Properties" button� The following
screen will appear:
5�
If "Use the following IP address" (2) is selected, your Router
will need to be set up for a static IP connection type� Write the
address information in the table below� You will need to enter this
information into the Router�
Wireless G Router
Wireless G Router
1
1
2
2
3
3
4
4
5
5
6
6
6�
If not already selected, select "Obtain an IP address automatically"
(1) and "Obtain DNS server address automatically" (3)� Click "OK"�
your network adapter(s) are now configured for use with the Router�
76
76
7
7
8
8
9
9
(1)
(2)
(3)
10
10
Publicidad
