Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS
1.
Power switch on/off
2.
Button – settings
3.
Button START/pause
4.
LCD screen
5.
Adjusting knob
6.
Base
7.
Body
8.
Underpan
9.
Height adjustable trays
10. Cover
BEFORE THE FIRST USE
1.
Rinse all dryer trays and the drip tray - never rinse the entire appliance - with water and dry them
with a towel.
2.
Start the empty machine and allow it to run while empty for 30 minutes. Light smoke and an odour
may be released; this is normal. Ensure adequate ventilation.
3.
Rinse the shelves again and dry them with a cloth.
4.
The machine is now ready for use. (This is only necessary the very first time you use the machine,
after you have unpacked it.)
ASSEMBLING
1.
Ensure to put the dehydrator on steady and solid surface. Stock the drying trays and connect the
plug with a wall socket.
2.
The trays can be stacked with a clearance of 1.5 cm or 2.8 cm, and are therefore adjustable to the
thickness of the food to be dehydrated.
3.
Depending on the size of the food, the trays can be easily adjusted in height (1,5 or 2,8 cm).It is
possible to simply turning the trays through 180°it is possible to double the height to the insert
wider slices of foods.
CONTROL PANEL
1.
Power key: Turn on or off the appliance
2.
SET: Settings: before start press this key, you can
choose set time and temperature
3.
Start/Pause key: Press this key, start working, press
this key again, work pauses. Actual parameter will
flash on the display – indicates you can adjust it by
rotating knob.
30
DO42602S
10
9
8
7
4
1
2
3
1
2
3
6
5
4
Publicidad
