Function Control - Kenwood KDC-BT838U Manual De Instrucciones

Function Control

Functions in the table below can be set up by using Function Control.
Category Item Setting
MENU "Security Set"/
"Security Clear"
"SRC Select" "1"*/ "2"
"iPod Mode" "OFF"/ "ON"*
"Device Regist"
"SPCL DVC
Select"
"Phone
Selection"
"Audio Selection"
"Device Delete"
"BT DVC Status"
"PIN Code Edit"
"Auto Answer" "OFF"/ "0s" – "8s"*
– "99s"
"SP Select" "Front"*/ "F-R"/
"F-L"
"Call Beep" "ON"*/ "OFF"
"BT F/W Update"
"Beep" "OFF"/ "ON"*
"Clock Adjust"
"Date Adjust"
"Date Mode" 7 types
"Display" "OFF"/ "ON"*
"Dimmer" "OFF"/ "ON"*
"ILM Dimmer" "AUTO"*/ "MNAL1"/
"MNAL2"/ "OFF"
"ILM Effect" "OFF"/ "ON"*
"ILM MSC SYNC" "OFF"*/ "ON"
"AMP" "OFF"/ "ON"*
"Zone2" "Rear"*/ "Front"
"Supreme" "OFF"/ "ON"*
"CRSC" "OFF"/ "ON"*
"Receive Mode" "Auto"*/ "Digital"/
"Analog"
"ESN="
"Name Set"
"Scroll" "Auto"*/ "Manual"
"Built in AUX" "OFF"*/ "ON"
"CD Read" "1"*/ "2"
"Audio Preset"
6
|
KDC-BT838U
Entry Setting overview
1 sec.
Sets/Resets security code.
Sets the source selection method.
When set to "ON", allows you to select music in the manner
similar to that of the iPod.
1 sec.
Register a Bluetooth device (pairing).
1 sec.
Allow registration of a special device that cannot be
registered normally.
1 sec.
Select a cell-phone subject to hands-free connection.
1 sec.
Select the Bluetooth audio player to be connected.
1 sec.
Cancel registration of the Bluetooth device.
1 sec.
Display the status of the Bluetooth device.
1 sec.
Specify the PIN code required when registering this unit
using the Bluetooth device.
Answer a call automatically after lapse of the preset time
interval for automatic answer.
Specify the voice output speaker.
Output a beep from the speaker when a call comes in.
1 sec.
Display the firmware version and update the firmware.
Setting the operation check sound (beep sound) ON/OFF.
1 sec.
Sets the clock.
1 sec.
Sets the date.
1 sec.
Sets the date display mode.
Turns off the display when no operation is performed.
Dims the display part in conjunction with the light switch
of the vehicle.
Sets whether the key illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
Sets whether the key illumination brightness is changed in
conjunction with the key operation.
Sets whether the key illumination brightness is changed in
conjunction with the sound volume.
Turns on/off the built-in amplifier.
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
Turns ON/OFF the Supreme function.
Switches to Monaural to decrease noise when reception is
poor.
1 sec.
Sets the receive mode of HD Radio.
Displays the Electronic Serial Number of satellite radio.
1 sec.
Sets the station name (SNPS)/ disc name (DNPS)/ AUX name.
Specifies whether the text is scrolled automatically.
Sets whether to display AUX during source selection.
Sets the CD read mode.
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
Condition Page
18
33
12
23
23
25
— 25
25
— 33
24
33
33
33
25
19
19
— 33
34
—
34
34
34
34
9
—
34
22