Installation Procedures - Toto Mercer Manual De Instrucciones

shower trim installation
1. Make sure the gasket is in the
escutcheon and the notch of the
gasket is aligned with the notch of the
escutcheon.
For ts___p and ts___pv
attach diverter lever to escutcheon using
supplied hex wrench
. remove the plastic cover from the valve
by twisting it clockwise.
3. Fasten escutcheon to pressure balance
valve using two supplied screws.
4a. thread canopy to pressure balnce
valve. hand tighten only. (see 4b for
lloyd).

installation procedures

5