Publicidad
Idiomas disponibles
Idiomas disponibles
The machine is very heavy. The machine shall be lifted from crate with a suitable lifting device
only that is certified to be able to carry the machines load.
The lifting and transportation of the machine must only be carried
out by qualified staff and must be carried out with appropriate
equipment.
Note that lifting equipment used (crane, forklift, sling, etc.) must be in perfect condition.
To maneuver the machine in the packaging can also a pallet jack or a forklift be used.
13.2.2 Preperation of the surface
Uncoated metal machine parts have been insulated with a greasy layer to inhibit corrosion.
This layer has to be removed. You can use standard solvents that do not damage the machine
surface.
Do not use solvents based on nitrite, aggressive solvents like break
cleaners or scrubbing agents!
These damage the machine surface.
13.3
Assembly
The machine itself is delivered pre-assembled. It must only be mounted miter fence, and other
controls on the machine.
Place the machine on firm ground and level.
The nut B is released to the screw A tob e able to rotate to the
desired height.
If the machine is focused on all 4 supports you tighten the
nuts B fixed on all 4 points of view.
The hand crank C for the depth setting is placed on the setting
spindle.
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
MULTI-DÜBELBOHRMASCHINE / SINGLE-RAW MULTI-BORING MACHINE / TALADRO MULTIPLE DBM 21N
WARNING
NOTICE
A
B
ASSEMBLY
C
Seite 30
Publicidad
