Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
• Read the instructions
all the wag through
before
starting.
• Handle parts carefullg to avoid scratching
paint.
• Set screws down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching
work surface
for the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing
reversal is completed.
These instructions
are for changing
the hinges from
the right side to the left side-if
you ever want to
change the hinges back to the right side, follow
these same instructions
and reverse all references
to left and right.
Unplug the refrigerator
from its electrical
outlet.
Empty all door shelves, including
the dairy
compartment.
TOOLS YOU WILL NEED
AdjustableWrench
10 mmSocketRatchet/Driver
MaskingTape
Thin-bladeScrewdriver
PhillipsScrewdriver
R]
%
@
©
REMOVE THE REFRIGERATOR DOOR
Tape the door shut with masking tape.
Using a Phillips screwdriver,
remove the
electronics
box cover screws on the flanges
toward the back of the refrigerator.
Using a Phillips screwdriver,
remove the hinge
cover screws. Lift up the front of the electronics
box cover to lift off the hinge cover. DO NOT
remove the electronics
box cover. There will be
a wire harness connection
to the hinge cover.
Do not disconnect.
Place the hinge cover on
the top of the refrigerator,
being careful not
to pinch or damage
any wires.
Screws
Electronics
Box Cover
Hinge
Cover
r_
using a Phillips screwdriver, remove the door
cap screws. Lift the cap off of the door.
r_
using a 10 mm socket ratchet/driver,
remove
the hex screws securing the top hinge. Lift
the hinge straight up to free the hinge from
the socket in the top of the fresh food door.
Door Cap
\
Screw
._
HexScrews
10
Publicidad
