Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature will
go below 60°F(16°C)because it will not run often enough
to maintain proper temperatures.
• Do not install the refrigerator where the temperature will
go above ZO0°F (37°C)because it will not perform properly.
• Install it on a floor strong enough to support it fully loaded.
CLEARANCES
Allow the following clearances for ease of installation, proper
air circulation and electrical connections.
Sides
2" (5.08cm)
Top
2" (5.08cm)
Back
2" (5.08cm)
[]
PLUG IN THE REFRIGERATOR
See the grounding
information
attached
to the power cord.
[_] PUT THE REFRIGERATOR IN PLACE
Move the refrigerator
to its final location.
[_] LEVEL THE REFRIGERATOR
The leveling
legs have 3 purposes:
1} The leveling legs adjust so the door closes
easily when opened about halfway. (The
front of the refrigerator
should be 1/4"
[6 mm] higher than the rear of the
refrigerator.)
2} The leveling legs adjust so the refrigerator
is
firmly positioned
on the floor and does not
wobble.
3}
The leveling legs serve as a stabilizing
brake
to hold the refrigerator
securely in position
during operation
and cleaning.
Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise
to lower it.
/
CAUTION:To avoid p ossible
personal
injury
or property
damage,
the leveling
legs must firmly
touch
the floor.
[]
INSTALL TOE KICK
r_
Transfer the slide plate as needed.
rB] Using a Phillips screwdriver,
secure the toe kick
with the screws provided.
Slide Plate
Screw
F_ SET THE CONTROLS
Set the controls to the recommended
setting.
-oeO0
OOee-
Cold
Coldest
CoMesl
Cold
Publicidad
