Descargar Imprimir esta página

Denon AVR-1603 Instrucciones De Operación página 22

Ocultar thumbs Ver también para AVR-1603:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 111
4
(3} DELAY TIME
cS
{Remote
coatrol
unit)
(4} D COMP.
{Remote
control
unit)
(5} LFE
{Remote
control
unit)
(6} DEFAULT
c;
{Remote
control
unit)
Use the
_
(left) and _
{right) buttons
to set the delay time
(Initial)
Lq::
I. i"i y
_:_i£iIl 'l:ii:
J
(left) button
(right) button
Use the
_
(left) and _
(right) buttons
to set the D COMP
(Initia0
_=, L,_.jFii
._. ,,
L_H"_ i-.
{left) button
{right)
button
NOTE:
This parameter
is displayed during DOLBY DIGITAL playback
Use the
_
(left) and _
{right) buttons
to set the LFE level
(Initial)
(left) button
(right) button
NOTE:
This parameter
is displayed during DOLBY DIGITAL and DTS playback
2
t_
To reset the settings
to the factory
defaults,
use the
!_ (left) and
_
{right)
buttons
to display "Yes"
(left)
button
(right)
button
{Remote
coatrol
unit)
Press the ENTER button to finish surround parameter
mode
• Operating
the surround
mode and surround parameters
from the main unit's panel
Turn the SELECT knob to select
the surround
mode
(Main unit}
1
2
1 t
• When turned clockwise
• When turned counterclockwise
To select the surround mode while adjusting the surround
parameters,
channel volume or tone control,
press the SURROUND
MODE button then operate the selector
amp
I_e
%
(Main unit}
Press the SURROUND
PARAMETER button
Press and hold in the surround
parameter button to select the parameter
you want to set
• The parameters
which can be set differ for the different
surlound modes
(Refer to "Surround
Modes and
Parameters"
on page 231
(Main unit}
Display the parameter
you want to adjust, then turn the SELECT knob to set it
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO
GAME, MQNO
MOVIE or MATRIX surround modes and the input signal switches to a digit al signal encoded
in Dolby Digital, the Dolby surround mode switches
automatically
When the input signal switches to a DTS
signal, the mode automatically
switches
to DTS surround
Surround
parameters
_s_
ROOM SIZE:
This sets the size of the sound field
There are five settings:
"small",
"reed s" (medium-small),
"medium",
"reed I" (medium-large)
and "large"
"small"
recreates a small sound field, "large"
a large sound field
EFFECT LEVEL:
This sets the strength
of the surround
effect
The level can be set in 15 steps from 1 to 15
DELAY TIME:
In the matdx mode only, the delay time can be set within the _ange of O to 110 ms
22

Publicidad

loading