Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARE
THE HOOD
(NON-DUCTED
HOODS ONLY)
Note: The following materials must be purchased separately for non-ducted recircu-
lation installations.
Non - Ducted Recirculation
Kit, Model RRK51.
5" diameter expandable
/ flexible aluminum duct.
1/16" diameter twist drill.
_IL CAUTION: Do not use plastic or rigid metal ducting.
1. Determine the length of the compressed
flexible aluminum ducting using the
following formula:
34" MINUS
Distance above
PLUS 12" if ceiling
= Length of compressed
cook top. See Page
height is 9-
flexible aluminum
9, height restrictions
feet. (or 24" If
ductwork.
table,
ceiling height
is 10 feet)
Worksheet:
34" -
(for 9' or 10' ceiling only) =
2. Discard
the discharge
collar/damper
supplied with the hood. Install the 5" to
6" adapter supplied with the Non-Ducted
Recirculation
Kit.
3. Attach aluminum flexible duct to the 5"
adapter.
Securely
tape all joints with
duct tape to prevent separation of com-
ponents as flex ducting is expanded,
4. Assemble
the recirculation
plenum
to
the flexible duct.
5. Drill three (3) 1/16" diameter
equally
spaced holes through the duct and duct
connector of the recirculation
plenum.
6. Secure duct to the plenum's connector
with (3) sheet metal screws: (3.9 x9.5
mm) Tape all joints with duct tape.
7. Secure electrical
system plate to the
range hood with (2) mounting screws.
PLENUM
-._
3 SCREWS
5" ALUMINUM
FLEX DUCT
ADAPTERS"
*o
3.9 x 9.5rnm
ELECTRICAL
SCREWS
_
SYSTEM
-11 -
Publicidad
