Sony WRR-862A Manual De Instrucciones página 16

Settings
1
Set the POWER switch to ON.
The display shows the same status as before the tuner
was last turned off.
2
Set the CONTROL switch to "1" or "2".
The tuner to be set is selected.
If the group name and channel number is shown on the
display, skip step 3 and proceed with step 4.
3
Press the MODE button until the group and channel
number appear on the display.
4
Press the SET button.
The group indication starts flashing.
Group setting
Display example for U66 model
5
Press the + or – button to select the desired group.
Pressing the + button cyclically changes the group in the
following order. Pressing the – button changes it in the
reverse order.
If you hold the button down, the group will
continuously change.
8
(GB)
Model available in USA
Model available in Europe (CE21)
Model available in Australia