16
INSTALLATION
INSTRUCTIONS
Leveling
fhe dryer
AWARNING
• To reduce the risk of injury to persons, adhere to all industry
recommended
safety procedures
including
the use of
long sleeved gloves and safety glasses. Failure to follow this
warning
can cause serious injury or death.
• The appliances
are heavy. Two or more people
are required
when installing
the dryer.
Failure to follow this warning
can
cause serious injury or death.
To ensure that the dryer provides
optimal
drying
performance,
it must be level.To minimize
vibration,
noise, and unwanted
movement,
the floor must be a perfectly
level, solid surface.
@ NOTE
-,
Adjust
the leveling feet only as far as necessary to level the
dryer. Extending
the leveling feet more than necessary can
.c aU! _e [.be dryer to vibra!e:_ ..................................................................................................................................................................................................
1. Position the dryer in the final location.
Place a level across the
top of the dryer.
2. Use an adjustable wrench to turn the leveling feet.Turn
clockwise to raise the dryer or counterclockwise to lower it.
Raiseor lower the leveling feet until dryer is level from side to
side and front to back.
Make sure that all 4 leveling feet are in firm contact with the floor.
Leveling
Feet
. All four leveling feet must rest solidly on the floor. Gently push
on the top corners of the dryer to make sure that the dryer does
not rock from corner to corner.
If you are installing the dryer on the optional pedestal, you must
use the leveling feet on the pedestal to level the dryer.The dryer
leveling feet should be fully retracted.