3,6
HOWTO
USE
Special
funcfions
The option
buttons
also activate
special functions,
including
Child
Lock, Rack Dry.
Press and hold the option
button
marked with the special
function
Rack Dry
Use Rack Dry with items, such as wool sweaters, silk, and lingerie,
that should dry flat. Rack Dry can also be used with items that
should not be tumbled dry, such as gym shoes or stuffed animals.
Pressthe RackDry button.
Child Lock
Use this option
to prevent
unwanted
use of the dryer or to keep
cycle settings
from being changed while the dryer is operating.
Press and hold the Easy Iron button
for 3 seconds to activate
or
deactivate
the Child Lock function.
The Child Lock icon will be shown in the display, and all controls
are disabled
except the Power button.
@ NOTE
................................................................
Once set, Child Lock remains active until it is manually
deactivated.
Child Lock must be turned
offto
run another
cycle. To deactivate
Child Lock, press and hold the Easy Iron
button
for three seconds.
To Install the Drying
Rack
1.With the dryer door open, slide the rack into the dryer drum.
2. Make sure it is seated evenly on the edge of the inner door rim
and resting flat on the inside of the dryer.
Damp Dry Signal
With this option, the dryer will signal when the load is
approximately
80% dry. This allows you to remove faster-drying
light weight
item or items that you would
like to iron or hang
while still slightly
damp. Press the Damp Dry Signal button.
Language change
1 Press the Power button
to turn on the Dryer.
2 Press and hold the Damp Dry Signal button
for 3 seconds, until
the following
screen appears in the display.
Language
{_/
English I1_
Fran_ais
I_
Espa_ot
I_
3 When the screen appears, English is displayed
as the default
language.
Press the Less Time button
to select Francais (French).
Press the Wrinkle Care button
to select Espanol (Spanish).
- @ NOTE ...........................................................
• If you don't press a button
or select another
language for
3 seconds after opening
the language
setting
option,
the
language
selection
function
will apply the existing
language
selection
and close.