Tools Required; Parts Included; Need Help - Johnson Livestrong LS10.0E Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TOOLS REQUIRED:

8 mm L-Wrench
13/15 mm Flat Wrench
5 mm L-Wrench/Screwdriver
Screwdriver (not included)

PARTS INCLUDED:

1 Stabilizer Tube
1 Guide Rail Set
2 Pedal Arms
2 Lower Handlebars
2 Upper Handlebars
2 Handlebar Covers
2 Lower Link Arms With Footpads
1 Front Top Cap Piece
1 Rear Top Cap Piece
1 Console Mast
1 Console
2 Handlebar Caps
1 Rear Cover
2 Sets Handlebar Covers
1 Audio Adapter Cable
1 Rubber Pad For Media Players
1 Power Cord
1 Hardware Kit
10
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level
flat surface. It is recommended that you place a protective covering on your floor.
Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
NOTE: It is recommended that two people work together for ease and efficiency
while assembling an elliptical.

NEED HELP?

If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Livestrong ls13.0eLivestrong ls15.0e

Tabla de contenido