Johnson Livestrong LS10.0E Manual Del Propietário página 39

USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the
headphone jack on your media player.
2) Use your media player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER (STANDBY MODE) (LS10.0E/LS13.0E)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated. When
Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after 15 minutes
of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on the console. This
feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the both resistance Up and Down keys for 3-5 seconds. Use the up/
down keys to navigate through the menu to ENG2. Press ENTER to select. Use up/down keys to select ENRGY SVE
ON or OFF. Press and hold STOP for 3-5 seconds to exit ENG2. Press and hold STOP again for 3-5 seconds to exit the
engineering menu.
DOWNLOADING A SOFTWARE UPDATE FROM LIVESTRONGFITNESS.COM
Occasionally a software update may be available for your console, via the included USB port.
Please visit: http://www.livestrongfitness.com/support/software-update/
to see if an update is available and get detailed instructions on how to download the latest software from your PC or Mac
NOTE: Performing a software update will delete all previously saved workout information.
ALL
MODELS
39