Descargar Imprimir esta página
Sears 36 Manual De Instalación
Ocultar thumbs Ver también para 36:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION
AND SERVICE MUST BE PERFORMED BY
A QUAUHED
INSTALLER.
IMPORTANT:
SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
[f the information
in this manual is not followed
exactly, a fire or explosion
may result causing
property
damage, personal injury or death.
FOR YOUR SAFETY:
--
Do not store or use gasoline
or other flammabJe
vapors and liquids
in the vMnity
of this or any other
appliance.
-- WHAT TO DO tF YOU SMELL GAS:
*
Do not try to light any appliance.
Do not touch any e[ectrka[
switch; do not use any phone in your building,
Immediately
call your gas supplier
from a neighbor's
phone.
Follow the gas supp[ier's
instructions.
,,
ff you cannot reach your gas supplier,
ca[[ the fire department.
--
Installation
and servke
must be performed
by a qualified
installer,
servke agency or the gas supplier.
For Standard
Installation:
Gas Cooktop Dimensions
Gas Cooktop Cutout
Dimensions
/A
2"(5.1 cm) Dia.
Opening to route --
power cabFe
* 30" (76.2 cm) rain. for
unprotected cabinet and
24" (61 cm) rain. for cabinet
with protected bottom surface.
X4"
(!0.2 cm x 10.2 cm)
opening to route gas supply.
71/4
(18.4 cm)
F
G
Do not slide unit into cabinet cutout,
Protruding
screws on the bottom
of ur it
may damage the bottom
front finish.
Figure 1
**Note: D & E are critical to the proper
installation of the cooktop. D reflects the
finished dimension. Due to the variation in
countertop materials, it is recommended to first
undercut this dimension, and then adjust it
upon installation of the cooktop.
All dimensions are stated in inches and (cm).
NOTE: Wiring diagrams for this cooktop
are enclosed in this booklet
318201459
(0407)
Rev A
English - pages
1o10
Espar_ol - Diginas
11-19
Wiring
Diagram
page - 20

Publicidad

loading