Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION DIMENSION
Select a good location to place your appliance where it is flat and easy to use. Avoid placing the unit
near heat sources, direct sunlight or moisture.
The above figures are a guideline for installation purposes. The actual dimensions of the unit may
vary slightly.
To ensure that your unit works at peak efficiency please maintain sufficient space around your unit
as outlined on the next page.
INSTALLATION
TRANSPORTATION
WHERE TO INSTALL YOUR UNIT
Do not carry the refrigerator horizontally or by laying it down.
Do not carry the refrigerator by holding the door or handle; the
refrigerator shall be carried by lifting the bottom.
This unit should never be moved alone, two people are required to safely
lift or move your unit.
The refrigerator must be placed on hard, flat ground; if cushioning is
needed, stable, hard, nonflammable cushion blocks shall be used.
DO NOT USE THE FOAM PACKAGING AS CUSHIONING BLOCKS!
The unit shall be kept away from damp locations where water is present.
Water or dirt should be removed from any surface of the unit as soon as
possible using a soft cloth. This will help prevent rust and will help your
unit run at peak efficiency.
Place the refrigerator in a well-ventilated place, reserve a certain space
around and behind the refrigerator, and do not cover or block the air grille
on the rear cover plate of compressor at the back of refrigerator; Keep
the refrigerator away from heat source or direct sunlight.
50
Publicidad
