Publicidad
Idiomas disponibles
Idiomas disponibles
NORMAL PHENOMENA
Button failure
• Please check the control board whether the fridge under lock mode. When under lock mode, all
buttons can't work.
Low voltage,the compressor can't start
• You should purchase pressurizer of more than 1000W when the area of the appliance
installation, that's better to protect your fridge.
Long time to start
• When the ambient temperature too high, it will take long time to start the appliance.
Middle beams feel hot
• Middle beams feel hot after a period of time of the appliance run, it belongs to the normal
phenomenon.
Dew drops
• When external air flows into the cool inner surface of the fridge, dew drops can be formed.
• If the humidity of the installed location is high or during the rainy season, dew drops can form on
the outer side of the fridge. This is a natural phenomenon that occurs during the humid weather.
Wipe the water drops with a dry cloth.
Noise
• When you operate the fridge for the first time, the fridge will operate at high speed to cool fast
and the sound can seem louder. When the internal temperature falls below a certain level, the
noise will subside.
• When the operation of the compressor is starting or ending; various parts expanding/ contracting
or various control devices operating or temperature change within the fridge, you will hear the
sounds, these are normal sounds.
Compressor hot
• When working, the temperature of the compressor outer is more than 80℃, please do not touch
the compressor, it may cause serious injury.
Compressor long time running
• When the ambient temperature too high or put too much fresh foods into the fridge, it will take
long time to cool down until the appliance run at the setting temperature.
59
Publicidad
