Publicidad
Idiomas disponibles
Idiomas disponibles
EN
30
Operation via remote control
Press this button once to activate the fire and flame effect. Room
temperature, date, time and flame effect light up on the screen. If no
button is pressed, the screen turns off after 15 seconds. Press any
button to reactivate the screen.
Press this button on the remote control once to switch between °C
(Celsius) and °F (Fahrenheit).
Press this button several times to adjust the flame brightness. There
are 4 different brightness levels to choose from.
This button has no function.
Press this button once to set the low heating level. The indicator
lights up on the screen. Press this button twice to switch off the
heating level.
Press this button once to set the high heating level. The indicator
lights up on the screen. Press this button twice to switch off
the heating level.
Automatic heating mode (intelligent control)
Press this button once to activate the automatic heating mode
according to your timer setting.
1.
If there is no timer setting for the selected day, the fire will be
switched off.
2.
If the room temperature is higher than the set temperature, the
heating is automatically deactivated.
3.
If the room temperature is 0-5 °C lower than the set temperature,
the low heating level will be activated.
4.
If the room temperature is at least 5 °C lower than the set
temperature, the high heating level will be activated.
Publicidad
