Publicidad
Idiomas disponibles
Idiomas disponibles
Date and time setting
(The setting is made via remote control)
Press this button once and then press the [+] or [–] button to set the
current hour (0 - 23).
Press this button again to set the minutes with the [+] and [–] buttons
(from 00 - 59).
Press the button again to set the date: Sunday - Saturday from left to
right. Wait 5 seconds until the setting has been saved.
Temperature setting
+
Press the [+] button to increase the temperature.
-
Press the [–] button to lower the temperature.
Timer setting
If you press this button for 3 seconds, the indicator
screen.
OK
Press this button to select the first day (set date: Sunday to Saturday).
Activate timer:
•
First set the time at which the timer is to be activated. "ON" lights up on the
screen.
•
Press the [+] and [–] buttons to set the hour. Press the button
afterwards.
•
Then use the [+] and [–] buttons to set the minutes and press the button
. The "ON" indicator goes out and "OFF" is displayed on the screen.
Deactivate timer:
•
Now set the time at which the timer is to be deactivated. OFF" lights up on
the screen. Press the [+] and [–] buttons to set the hour. Press the button
afterwards.
•
Then use the [+] and [–] buttons to set the minutes and press the button
. The "OFF" indicator switches off.
Complete the timer setting:
•
Press the button
temperature.
OK
•
Press the
button to exit the day setting. Repeat the steps mentioned
in the sections "Activating the timer" and "Deactivating the timer" to set
the timer for additional weekdays. When you have finished the setting, the
turns off.
display
and press the buttons [+] and [–] to adjust the
flashes on the
EN
31
Publicidad
