Sony UP-860 Manual De Instrucciones página 5

rr
Refer to the pages indicated in the circles for details.
Location and Function of Parts and Controls
Front Panel
Power ON/OFF switch and indicator
Press to turn the power on. The indicator is lit while
the power is on.
CONTR (contrast) control ®
Use this contro! to adjust the contrast of the print-outs.
BRIGHT (brightness) control ®
Use this control to adjust the brightness of the print-
outs.
THRU/EE selector ®
Use this selector to select the video signal output
from the VIDEO OUT connector.
THRU: input signals are output directly to the video
monitor.
EE: input singnals are output to the video
monitor after being processed by the
printer's circuitry.
POSI/NEGA selector @
Use this selector to switch between positive and
negative print-outs.
[6]
COPY button @
Press this button to output another copy of the
previous print-out
PRINT button ©@
Press this button to print the picture currently
displayed on the monitor.
The picture displayed when you press the PRINT
button is stored on memory.
PAPER EMPTY indicator
This indicator lights when the printer is out of paper.
OPEN/CLOSE button
Press to open or close the door. Also, press this button
to stop printing midway.
Paper feeder and cutter
Use to cut the printing paper.