Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2
Install the Discharge Pipe onto the Pump ( All Models)
WEEP HOLE
Figure 2.1
STEP 3
3.1)
Install the gasket into the "gasket seat" at the top of the
basin, refer to Figure 3.1 for details.
SEAL
DISCHARGE PIPE
PUMP DISCHARGE
Installation of the Gasket
BASIN
Figure 3.1
© Copyright 2023 Zoeller
IMPORTANT!
BE SURE THAT WEEPHOLE
IS NOT DIRECTED TOWARD THE FLOAT!
Water stream will be visible from this hole during pump run
periods.
SK2002
ENSURE NOTCHES LINE UP
Co. All rights reserved.
®
5
SEAL DETAIL
SK2972
Publicidad
