GE 21 Serie Manual Del Propietario Y Instalación página 14

Replacing the light bulbs.
Turning the control to the 0 (off) position does not remove power to the light circuit.
Refrigerator Lights
Ionsomemodels)
_, CAUTION: Light bulbs may
be hot.
O Unplug the refrigerator.
To remove the light shield, grasp the
shield atthe back and pull outto release
the tabs at the back.
@
Rotate the shield down and then forward
to release the tabs at the front of the
shield.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield.
Plug the refrigerator back in.
NOTE:Appliance bulbs mag be ordered from
GE Parts and Accessories,800.626.2002.
LED Refrigerator Lights (onsomemodds)
An authorized technician will need to replace
the LEDlight.
Light
Shield
Appearance may vary
Freezer Light
_, CAUTION: Light bulbs may
be hot.
Unplug the refrigerator.
Removethe freezer basket for access.
The bulb is located at the rear of the
freezer inside a light shield.
O To remove, grasp the shield at the top
and pull out to releasethe tabs at the
bottom.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield and freezer basket.
Plug the refrigerator back in.
la