Descargar Imprimir esta página

GE 21 Serie Manual Del Propietario Y Instalación página 27

Ocultar thumbs Ver también para 21 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Instructions
REVERSING THE DOOR SWING
{Single Door Refrigerator
Models onlg}
IMPORTANT NOTES
When reversing the door swing:
NOTE: Door swing is not reversible on stainless steel
models.
• Read the instructions all the wag through before
starting.
• Parts are included in the door hinge kit.
• Handle parts carefullg to avoid scratching paint.
• Set screws down bg their related parts to avoid
using them in the wrong places.
• Provide a non-scratching
work surface for the doors.
IMPORTANT: Once gou begin, do not move the cabinet
until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side-if
gou ever want to
change the hinges back to the right side, follow these
same instructions and reverse all references to left and
right.
• Once door swing is finalized, ensure the logo badge
is properlg aligned and permanentl U secured to
the door bg removing the adhesive cover on the
back side.
NOTE: A replacement logo badge is included in the
hinge kit.
Unplug the refrigerator from its electrical
outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
AdjustableWrench
5/16" SocketRatchet/Driver
MaskingTape
Thin-bladeScrewdriver
PhillipsScrewdriver
TerxT-20Driver
[]
REMOVE THE REFRIGERATOR DOOR
r_
Tape the door shut with masking tape.
r_
Remove the hinge cover on top of the
refrigerator
door bg removing the Phillips-head
screws and pulling it up.
rc]
using a 5/16" socket ratchet/driver,
remove the
bolts securing the top hinge to the cabinet. Then
lift the hinge straight up to free the hinge pin
from the socket in the top of the door.
Hinge_Cover
@
Hinge
G
Remove the tape and tilt the door awag from
the cabinet. Lift the door off the center hinge
pin. Ensure that the plastic hinge pin thimble
remains on the hinge pin or inside door hinge
pin hole located in the bottom of the door.
[]
Set the door on a non-scratching
surface with
the inside up.
27

Publicidad

loading

Este manual también es adecuado para:

25 serie